KGPS-100KG 100KW Gold and silver electric melting furnace

The furnace is low consuming ,little burning damage .Fast melting speed ,stove age long,low labour strength and simple operate

Introduction and application

Medium Frequency Induction Furnace is the device converting three phase power current into single-phase intermediate frequency current and enabling metal to produce eddy current loss through the electromagnetic field induction to achieve heating and melting. Mainly be used in the material of ferrous and non-ferrous metal casting, melting and heating treatment industry, such as iron, steel, brass, cooper ,zinc ,tin and so on. As well as heating treatment prior to forging, sintering and tube-bending forming in casting and melting industries.

Performance Characteristics:

1.Zerovoltage scanning soft , available for start or stop at any time under any state without impact on power supply;

2.Speedy melting, low production cost , low pollution, conforming to environmental protection requirement;

3.Melting directly from low temperature, available for fully emptying of solution , easy change of category of melting material;

4.Flexibly adjustable power, easy and continuous smooth adjustment, easily controllable temperature, low oxidization loss, uniform metal content;

5.Furnace shell with cast aluminum ally or steel shell construction, small footprint, easy overturn body, available for selection of electric, manual, hydraulic or other overturn mode as needed;

6.Contravariant automatic regulation circuit available for matching of load impendence automatically, maintaining good operation without regulation or compensation of capacitance; power supply with fault diagnosis facilitating service.

Equipment Type & Technical Parameters:

Equipment Type(Furnace capacity)	Power input(Three-phase Four- wire 50/60Hz)			Power Output				Melting Time(Minutes)	Power consumption per ton of material(KW)
	Rating power(KW)	Input Voltage(V)	Input Current(A)	DC Current(A)	DC Voltage(V)	IF Voltage(V)	IF frequency(KHZ)		Steel(KW)	Iron(KW)	Copper(KW)
KGPS--0.05T	50	380	80	100	500	750	1-2.5	20-60	850	800	450
KGPS--0.1T	100	380	160	200	500	750	1-2.5	20-60	800	750	450
KGPS--0.2T	160	380	256	320	500	750	1-2.5	30-70	750	700	440
KGPS--0.25T	160	380	256	320	500	750	1-2.5	30-70	750	700	440
KGPS--0.3T	200	380	320	400	500	750	1-2.5	30-70	700	650	430
KGPS--0.5T	250	380	400	500	500	750	1-2.5	30-70	650	600	430
KGPS--0.75T	400	380	640	800	500	750	1-2.5	40-70	630	580	400
KGPS--1T	600	380	960	1200	500	750	0.7-1	40-70	600	560	390
KGPS--1.5T	1000	380	1600	2000	500	750	0.7-1	50-70	580	530	380
		660	912	1140	880	1300
KGPS--2T	1250	380	2000	2500	500	750	0.5-1	50-70	560	520	370
		660	1140	1430	880	1300
KGPS--3T	1500	380	2400	3000	500	750	0.5-1	50-80	530	510	350
		660	1370	1710	880	1300
KGPS--5T	2500	380	4000	3200	780	1170	0.3-1	60-90	510	490	340
		660	2272	2840	880	1300
KGPS--10T	5000	660	4560	5700	880	1300	0.3-1	70-100	500	450	320
temperature:1.Steel 1650°C   2.Iron 1450°C     3.Copper 1150 °C     4.Brass 1000 °C   5. Aluminum 700 °C

Remark:

1.Melting time and power  consumption/ton is important to equipment power, raw material shape and weight, operator's skill level and other elements;  

2.Configuration :an intermediate frequency power supply,a capacitor cabinet, an overturn control cabinet, body, two sets of reduction boxes and supports, two water cooling cables, etc

 3.Configuration :an intermediate frequency power supply,a capacitor cabinet, an overturn control cabinet, body, two sets of reduction boxes and supports, two water cooling cables, etc

4.The above data is of standard model. We also provide customized non-standard products with different power or melting speed.

KGPS-100KG 100KW Gold and silver electric melting furnace